Aluminum coil insulation packaging requirements

2015/3/4 14:16:43

Export volumes are holding a large amount of aluminum products, export packaging is usually taken fumigation Tic-Tac-frame mode, external fixation with steel, aluminum exterior with double roll cloth rain moisture inside to prevent moisture agent, taking sealed packaging, suitable for shipping. Here to tell you about insulation aluminum coil packaging requirements.

Aluminum coil insulation packaging should be based on product specifications, size selection boxes and packaging, for box packaging, product can not be crushing or ran after me. Carton production materials can be wood, plywood, fibreboard, metal and other materials. Box should be clean and tidy, there is sufficient strength to ensure that no deformation during storage and transportation, not damaged. Wooden box nail move was arranged, nail tip is not exposed, should the disc down, avoid nail caps during storage and transportation, nail foil JIANZHA injury, bottom bracket height should meet the requirements of the transport truck. Aluminum coil products after inspection and inspection cover India, should be wrapped around the outside layer of strong neutral or slightly acidic material, joints sealed with tape or label. In the end face of the pad soft liner. The end face of the insulation to protect the aluminum volume. Plus desiccant, put a plastic bag, the plastic ends of excess aluminum coil part Cypriots die with dimensions suitable plastic sealing plug after release crates. After packing the product, and then covered with a layer of moisture on top of paper or plastic sheeting, after the release of people packing list before capping and sealing with a steel strip should be tied securely.